TMRS-710 Integrated Rebar Scanner
The appearance of TMRS-710 integrated Rebar detector:
a)Top view:
b)Left view:
c)Right view:
d)Bottom view
Figure 2.1 Schematic diagram of host appearance
1.1 Introduction
TMRS-710 Integrated Rebar detector are mainly used for detecting
the internal reinforcement position, the protective layer
thickness, reinforcement spacing and diameter of rebar. It can
accurately draw the distribution map of the whole rebar, to provide
test data with high precision and high speed; the
integratedstructure of the host and the sensor coil, making it is
convenient and quick when carrying and field operation ; It is
characterized in coil structure design, faster speed, higher
accuracy, stronger resolution.
1.2 Functions
1.2.1 Main Functions
1. Accurately measure the thickness of protective layer of rebar;
2. Locate the position, trend and distribution of steel bars;
3. Measure the protective layer of steel bar and estimate the
diameter of steel bar;
4. Storage, view and transmission of detection data.
1.2.2 Special Functions
1. The detection mode is intuitive, accurate, accurate display of
steel bar position, spacing, protective layer thickness in the same
screen;
2.The thickness measurement is completely realized. During the
measurement process, pages can be turned back and forth, data and
graphics can be viewed, and the test data can be deleted at any
time.
3.Single handing machine, operation design and four wheel
positioning method, equipped with high strength wear-resistant
tires, easy to protect the wear and tear of the detector;
4. Analysis software can produce two-dimensional plan view and 3D
three-dimensional view.
5. JGJ detection mode realizes 1-6 repeated tests of a single steel
bar, and automatically calculates the average value.
1.2.3 Main Features
1. 2.8 inch high resolution color LCD screen (320 x 240 pixels),
whether in indoor or outdoor, any situation can be clearly visible
detection data;
2. Multi-coil structure design, faster, higher precision, stronger
resolution;
3. Using USB mode data transmission and charging, you can quickly
upload the stored data to the computer through the USB.
4. With built-in high-capacity lithium battery, the power
consumption is low, in the case of battery is full the standby time
is about 16 hours;
5. Data management mode in the data storage, view, delete and other
functions, can store about two hundred thousand rebar measuring
point data;
6. The problem of reinforcing steel bar leakage is solved by using
super dense tendon resolving power;
7. Select configuration Standard test block which can be configured
with special and unique design;
8. Using the host and sensor coil integrated design, compact size,
light weight, easy to carry;
9. Adjacent steel bar intermediate position real-time judgment,
indicating light prompt, can avoid around the steel bar, easy
drilling coring;
10. The instrument bag is shockproof, has a protective lining
inside, and is equipped with a waterproof cover for easy carrying;;
11. Equipped with medium and large steel bar detection software, it
is convenient for professional data analysis, data processing and
generating complete report in PC.
1.3 Technical sheet
| Mode | TMRS-710 |
| Applicable range of Rebar(mm) | φ6～φ50 |
| Protective layer thickness range(mm) | Small range:1～80 Large range:5～185 |
| Maximum Allowable Error of Protective Layer Thickness(mm) | ±1 | 1～60 |
| ±2 | 60～100 |
| ±3 | 101～120 |
| ±5 | 121～160 |
| ±8 | 161～185 |
| Applicability of Diameter Measurement (mm) | ϕ 6～Ф50 |
| Maximum Error of Diameter Measurement (Specification) | ±1 |
| Scanning mode | Thickness model, JGJ Testing |
| Scanning range | Borderless |
| JGJ Testing | Achieve single point 1-6 measurements, automatically calculate the
average |
| Data transmission mode | USB wireless |
| Screen | 2.8-inch High Resolution Color LCD Screen (320 x 240 pixels |
| Power supply | Built in high capacity lithium battery |
| Set shutdown time | 5min,10 min,15 min,30 min,60 min,90 min |
| Working hours | ≥16h |
| Screen | 320×240 |
| Storage | 200K Measuring point of steel bar |
| Communication | USB interface |
| With error correction | -3.0～+3.0(±0.5,±1.0,±1.5,±2.0,±2.5,±3.0) |
| Operation | Silicone keypad |
| working temperature | -10℃～+42℃ |
| Size(mm) | 219×92×106 |
| Weight(Kg) | 0.60(Battery included) |
1.4 Measurement interface
Integrated Rebar detector The measurement mode is shown in Figure 1
and 2
(1) Thickness model
(2)JGJ measuring interface
1.5 Standard Configuration
| No. | Name | Unit | Quantity | Remarks |
| 1 | Product Host | piece | 1 | / |
| 2 | Charger | piece | 1 | / |
| 3 | USB Cable | piece | 1 | / |
| 4 | User Manual | piece | 1 | / |
| 5 | Producer Certificate | piece | 1 | / |
| 6 | Warranty Card | piece | 1 | / |
| 7 | Packing List | piece | 1 | / |
| 8 | Software CD | piece | 1 | Limited to Different Models |
| 9 | Product Suites/Box | piece | 1 | / |
| 10 | crayon | piece | 1 | / |
| 11 | Standard Block | piece | 1 | Optional accessories |
