| Model | TMHVS-1000MDT-XY |
| Hardness tester |
| Test force | 10gf (0.098N),25gf (0.245N),50gf (0.49N),100gf (0.98N), 200gf
(1.96N),300gf (2.94N),500gf(4.9N),1kgf (9.8N) |
| Carried standard | GB/T4340,ASTM E92 |
| Min measurement unit | 0.01µm |
| Conversion scale | HRA,HRB,HRC,HRD,HRF,HV,HK,HBW,HR15N,HR30N,HR45N,HR15T,HR30T,HR45T |
| Hardness measurement range | 8~2900HV |
| Test force loading method | Automatic (loading ,dwell,unloading) |
| Objective, indenter conversion | Automatic |
| Objective | 10X |
| Objective magnification | 10X(testing),40X(testing )(20X optional) |
| Dwell time | 1~99s |
| Max height of specimen | 90mm |
| The distance from indenter center to the outer wall | 130mm |
| Data output | LCD display |
| Data storage | Data is saved in U disk as EXCEL format |
| Power supply | AC220V+5%,50-60Hz |
| Software |
| Camera | 1,300,000 |
| Driving motor | Stepping motor |
| Automatic sample table movement | The speed of moving up the x-y axis can be flexibly changed by the
software .Click any point in the interface through the mouse to
automatically select a point, the start position of the line can be
set and random move position set,by clicking the mouse to select
the automatic x-y displacement table carrying table for 8
directions of arbitrary movement control, can adjust the speed, can
automatically reset. |
| Dimension | 100 × 100mm |
| Max movement | In the X-Y direction 50 × 50mm |
| Min movement | 1mm |
| Movement speed | 1-10mm/sec,adjustable |
| Displacement repetition accuracy | In 4um |
| Mode setting | The software system can control the automatic loading platform for
programming and moving: 1)Measurement mode(Random A) Use this mode to load and read an optional point 2) Horizontal (X direction), vertical (Y direction) load and read 3) Measurement mode(Line Set A) Use this mode to suppress and read the direction at an angle to the
surface (Zigzag movement, that is, the polyline movement of the
hardened layer depth measurement) 4)Measurement mode(Line Set B) Press and read at regular intervals using this mode 5)Trajectory coordinate movement and other mobile programming |
| Test procedure | After all loads, measure one by one, while loading and measuring |
| Identation measurement method | Automatic /Manual |
| Automatic measuring time | About 0.3sec/1 pc identation |
| Hardness calibration | Can be corrected according to the standard hardness block or length
scale |
| Data output | The inspection report can be customized according to user
requirements
Through data processing software, the depth value of hardened layer
formed after continuous measurement of the sample can be displayed
in the form of a table
It is convenient to output various measurement data, hardness value
table, depth of hardening layer, maximum value, average value,
minimum value, etc |
